Cylindrical Grinding Machine for Super finishing metal shaft and other cylindrical surface

Description:

CNC miller, 1. Integrated with CNC milling and mirror finishing2.strengthen surface of metal work piece.3.BT50roller

Major advantageof this CNC miller: 

1. Integrated with CNC milling and HawkingPT mirror finishing.

2. A single fixture on the lathe, it can be done with mirror surface of work piece and roughness from Ra0.2µm to Ra0.4µm.

3. It can strengthen surface of metal work piece, preset compression stress and raise micro-hardness, wear-resistance,  anti-corrosion, fatigue lifetime, eliminate micro-defect.

4. You can choose CNC spinning table to add the fourth spindle and therefore get mirrorized surface of lamellar work-piece.

Major featureof this CNC miller: 

1. Oil cooling for main spindle, main spindle has good cooling function and is suitable for long time working.

2. Main spindle has directional function of eight directions, can do HawkingPT surface processing in eight directions.

3. Main spindle is BT50 with good rigidity.

Major specification and parameterof this CNC miller:

 

Specification		Unit	Parameter
Travel Stroke	X spindle	mm	1200
	Y spindle	mm	650
	Z spindle	mm	600
	Distance between table face and spindle nose	mm	200-800
Work table	Worktable Size	mm	1300×650
	T Slot(W×Q×G)	mm	18×5×125
	Max, loading weight	Kg	1200
Main spindle	Motor power(stepless speed regulating)	Kw	11/15
	Rotation Speed	rpm	60-8000
	Speed Taper	No.	BT-50
Feeding  parts	Servo motor power of X,Y,  Z axes	Kw	3
	Servo motor torsion of X ,Y,  Z axes	Nm	22.5/22.5/22.5
	Rapid travel speed of three axes	m/min	18/18/15
	Feeding rate of cutting	mm/min	1-5000
	Manual feeding rate	mm/min	0-2000
Precision of three spindles	Locating precision	mm	0.016
	Relocating precision	mm	0.008
others	Weight	kg	10000
	Total power	kw	25
	Control system	M70A
	Package size	Mm	3600×2700×2800
	Lubricating of main spindle	High-end lubricating grease

 

Cylindrical Grinding Machine for Super finishing metal shaft and other cylindrical surface